This job was posted by https://www.kansasworks.com : For more
information, please see: https://www.kansasworks.com/jobs/12924579
The Maintenance Mechanic 11 is an Individual Contributor responsible for
performing installation, preventative maintenance & repairs on all plant
equipment and facilities including machinery, presses, shears, welders,
mechanical clutches, drive trains, etc.
Essential Functions
- Performs and logs new installations of equipment, including high and
low voltage systems, and repairs/replacements of worn parts
including fabrication of fixtures
- Conducts daily, weekly, and monthly inspections throughout the plant
to ensure all equipment is operating properly
- Performs general maintenance tasks including buildings, grounds,
(snow removal), etc.
- Completes diagnosis, testing, disassembly, inspecting, precise
measuring, repair and re-assembly of plant equipment or components
- Uses troubleshooting aids, such as volt, ohm and amp meters, and any
other tool used to diagnose equipment to interpret readings
- Supports manufacturing demands including working during non-peak
hours (e.g., off-shifts, weekends, etc.) as required/assigned)
- Supports Lean Manufacturing initiatives
- Ability to wear all required personal protective equipment (PPE) and
work both in a non-temperature-controlled environment and outdoors
- Other duties as required and/or assigned
Important Details about the Role
- Must display an aptitude for problem solving and the ability to plan
for or around future needs or problems
{=html}
<!-- -->
- Must be able to determine when equipment should be removed from or
returned to service
- Must be able to identify and report hazards
- Accountable and responsible for essential tools and equipment
provided along with the maintenance of these tools and equipment
- Actively participates in department safety, demonstrates excellent
safety practices and behaviors which conform to all Valmont safety
policies and procedures
{=html}
<!-- -->
- This position reports to the Maintenance Manager
Working Conditions & Physical Efforts:
Work is performed in both an outdoor and indoor shop environment. This
position will be exposed to all hazards located at manufacturing sites
including noise, fumes, excessive heat/cold, dust, welding arc, all
chemicals associated with the manufacturing areas, smoke, and confined
spaces. Environment is fast paced and demanding most of the time.The job
requires safety glasses, hearing protection, and metatarsal safety shoes
be worn at all times. The employee must be able to spend the entire work
shift on their feet within the shop environment. The incumbent must also
be able to wear the required personal protective equipment (PPE) for
working in the production facility.
Hazards:
This job requires handling metal objects some of which have sharp edges.
Extreme care and awareness should be taken for all production jobs.
Below are some common hazards that exist for this particular position.
Set up and run of equipment provides the potential for injury through
slips, falls, strains, pinch points, tripping hazards, shot blasting
equipment, high pressure air nozzles, material handling equipment.