Shire Manufacturing Associate I in Thousand Oaks, California

This shift schedule is Monday and Thursday to Saturday 12:00 PM to 10:00 PM. Due to business need, you may be required to work overtime and/or support operations on an alternate shift.

The Manufacturing Associate I is responsible for executing all manufacturing department processes while strictly adhering to cGMP, environmental health and safety guidelines and any other related regulations that could apply. The Manufacturing Associate I is expected to fully participate in both departmental projects and any quality working teams that may be applicable. This position shall be responsible for the hands on execution of activities as they relate to the manufacturing of products. All of the specific requirements presented in this job description are applicable to the functional area in which it resides.

Essential Duties and Responsibilities

Formulation/Filling:

  • Participate in bulk formulation, aseptic filling, Lyophilization, and capping operations

  • Executes processes in production while strictly adhering to cGMP, environmental health and safety guidelines and any other related regulations which could apply

  • Clean, Set up, operate, and teardown of equipment such as, tanks, filtration systems, filling lines, lyophilizers, etc.

  • Operate general production equipment such as an autoclave, filter integrity testers, temperature probes, pH and conductivity meters, CIP skids, etc.

  • Receive and distribute supplies into the manufacturing areas.

  • May perform other duties as assigned.

Qualifications

  • Technical Skills – Developing.

  • Troubleshooting – Developing.

  • Theoretical Knowledge - Basic knowledge of chemicals and laboratory equipment.

  • Written Communication - Able to document process and successfully uses GDP.

  • Interpersonal Communication - Demonstrates appropriate communication within the department and to supervisor.

  • Presentation Skills – Developing.

  • Sphere of Influence – Developing.

  • Leadership – Developing.

  • Planning – Developing.

  • Processing Capabilitie s - Able to perform operations with oversight.

  • Project Performance - Able to constructively participate in projects affecting the local department.

  • Training - Proactively seeks opportunities to learn new skills.

  • Continuous Improvement - Participates in continuous improvement initiatives.

All Positions:

  • The position requires shift, weekend, and holiday work. Overtime may be required at times

  • Employee maybe required to manage hazardous wastes in compliance with company procedures & State/Federal/Local hazardous waste regulations. Duties may include: Identifying, handling, generating, accumulating, storing, labeling, and on-site transporting of hazardous wastes.

  • Demonstrated understanding and compliance in Standard Operating Systems, Current Good Manufacturing Processes (cGMP) & Good Documentation (GDP).

  • Ensure safety, security, and the environment in all aspect of the daily activities and any potential safety hazardous are addressed and corrected immediately.

  • Understand ergonomic relationship between people, equipment and working environment.

  • Must be able to navigate, conduct searches, and fill on line forms on Personal Computer for the purposes of training, performance management, and self service applications.

  • Must have the ability to navigate electronic mail systems and intranet for communication purposes.

Education and/or experience

Bachelor’s degree preferred or AA degree with 2 years of related work experience or a high school diploma with a minimum of 4 years of related work experience. Scientific degree preferred.

  • Internal Candidates: The aforementioned requirements are preferred for internal candidates. They must demonstrate the proficiencies/qualifications in order to qualify for the position.

Physical Demands

The overall physical exertion of this position requires medium to heavy work.

  • May be required to sit between 1-2 hours in all Manufacturing areas.

  • May be required to walk between 3-4 hours in Bulk and over 4 hours in the F/F and Suite A areas.

  • May be required to stand for 3-4 hours in Bulk and Suite A and over 4 hours in F/F.

  • May be required to bend at the neck/waist for up to 1 hour in Bulk, between 1-2 hours in Suite A and over 4 hours in the F/F areas.

  • May be required to squat up to 1 hour in Bulk, and between 1-2 hours in Suite A and F/F.

  • May be required to climb (use step stools and ladders) up to 1 hour in all Manufacturing areas.

  • May be required to reach above/below the shoulder between 1-2 hours in Bulk and Suite A and between 3-4 hours in the F/F areas.

  • May be required to kneel up to 1 hour in all Manufacturing areas.

  • May be required to twist at the neck up to 1 hour in Bulk and Suite A and between 3-4 hours in the F/F area.

  • May be required to twist at the waist up to 1 hour in Bulk and between 3-4 hours in the F/F and Suite A areas.

  • May be required to lift up to 50lbs in the F/F area, up to 75lbs in Bulk and over 75lbs in the Suite A area. Lifts per shift are up to 14 times in Bulk and Suite A and up to 100 times in the F/F area.

  • May be required to carry up to 25lbs in Bulk and Suite A and up to 50lbs in the F/F areas. Carry distance of up to 30ft in Bulk and Suite A and up to 6 feet in the F/F areas. Carries per shift are up to 6 times in Bulk, up to 14 times in Suite A and up to 100 times in the F/F areas.

  • Requires repetitive use of both right and left hands and arms up to 3-4 hours in all Manufacturing areas.

  • May require simple grasping up to 1 hour in Bulk and Suite A and between 3-4 hours in the F/F areas.

  • May require power grasping up to 1 hour in Bulk and Suite A and over 4 hours in the F/F areas.

  • May require fine manipulation up to 1 hour Bulk and Suite A and between 1-2 hours in the F/F areas.

  • May require pushing/pulling with hands/arms between 1-2 hours in Bulk and Suite A and between 3-4 hours in the F/F areas.

  • May require office work activities with hands/arms up to 1 hour in Bulk and between 1-2 hours in Suite A and the F/F areas.

  • May be required to gown frequently and balance when gowning into clean areas.

  • Will not be required to drive cars, trucks, forklifts or other equipment.

  • May be required to work around moving equipment and machinery.

  • Will not be required to walk on uneven ground.

  • May be exposed to noise above 85 dBA in Bulk and Suite A. This may require hearing protection and other protective equipment to be worn.

  • May work and have exposure to hot, cold, wet environment/conditions in all Manufacturing areas.

  • May be exposed to dust, gases, chemicals, liquid Nitrogen, and fumes. May require respiratory protection.

  • May be required to work at heights above floor level.

  • Will not be required to operate foot controls or repetitive foot movement.

  • May require the use of special visual or auditory protective equipment in Bulk and F/F areas.

  • May be required to work with biohazards such as: blood borne pathogens, seage or medical waste in the F/F areas.

  • May be required to drive to travel to other facilities, training sites, and off site meetings.

  • May be required to work in confined areas.

Will require entering a 2-8 degree Celsius & -60 degree Celsius freezer to store and retrieve materials and various chemicals in support of mfg such as IPA, 500ppm sodium hypochlorite in the F/F area.

Working Environment

  • Must be able to work in controlled or clean room environments requiring special gowning. Will be required to follow gowning requirements and wear protective clothing over the head, face, hands, feet and body. No make-up, jewelry, contact lenses, nail polish or artificial fingernails may be worn in these work environments.

  • Will have interaction with other people.

  • Pace may be fast and job completion demands may be high.

  • This position requires shift, weekend and holiday work.

  • Overtime may be required at times.

May be required to work or be assigned to a different shift as needed.

Notice to Employment / Recruitment Agents:

Employment / Recruitment agents may only submit candidates for vacancies only if they have written authorization to do so from Shire’s Talent Acquisition department. Any agency candidate submission may only be submitted to positions opened to the agency through the specific Agency Portal. Shire will only pay a fee for candidates submitted or presented where there is a fully executed contract in place between the Employment / Recruitment agents and Shire and only if the candidate is submitted via the Agency Portal. Candidates submitted or presented by Employment / Recruitment Agents without a fully executed contract or submitted through this site shall not be deemed to form part of any Engagement for which the Agency may claim remuneration.

Equal Employment Opportunity

Shire is an Equal Opportunity Employer committed to a diverse workforce. Shire will not discriminate against any worker or job applicant on the basis of race, color, religion, gender, gender identity, national origin, ancestry, age, sexual orientation, marital or civil partnership status, pregnancy, gender reassignment, non-job related mental or physical disability, genetic information, veteran status, military service, application for military service, or membership in any other category protected under law.

EEO is the Law - https://www.dol.gov/ofccp/regs/compliance/posters/pdf/eeopost.pdf

EEO is the Law – Supplement - https://www.dol.gov/ofccp/regs/compliance/posters/pdf/OFCCPEEOSupplementFinalJRFQA508c.pdf

Pay Transparency Policy - https://www.dol.gov/ofccp/pdf/pay-transp_formattedESQA508c.pdf

Reasonable Accommodations

Shire is committed to working with and providing reasonable accommodation to individuals with disabilities. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please call 484-595-8400 and let us know the nature of your request and your contact information.

Shire is the leading global biotechnology company focused on serving people with rare diseases and other highly specialized conditions. We strive to develop best-in-class products, many of which are available in more than 100 countries, across core therapeutic areas including Hematology, Immunology, Neuroscience, Ophthalmics, Lysosomal Storage Disorders, Gastrointestinal/Internal Medicine/Endocrine and Hereditary Angioedema; and a growing franchise in Oncology.

Our employees come to work every day with a shared mission: to develop and deliver breakthrough therapies for the hundreds of millions of people in the world affected by rare diseases and other high-need conditions, and who lack effective therapies to live their lives to the fullest.